Stress Testing
Here at Werkr Tractors, we have less of a self-preservation mentality compared to some other companies with their fragile products. We like to find vulnerabilities, and we like to find them quickly. Here are some of my favourite tests we conducted:
I drove the tractor into a pole. At a reasonably slow speed, I drove the yellow tractor into a post. Unfortunately, I did not take a video of this event. We learned that the rear motors have incredible torque and good traction: Instead of stalling the motors or having wheel slip, we bent the tubes going to the front wheels. We have since strengthened that section on the grey tractor.
I drove the tractor at full speed (21 km/h) through a bumpy field with the mower deck raised up. The custom industrial mower deck that we designed weighs upwards of 100 kg, with some back-of-the-napkin calculations (assuming it catches the implement within 30mm, and it drops from 75mm, both of which are conservative estimates), then the effective weight that the front lift has to carry is 250kg.
I drove the tractor slalom through hay bales at full speed. The tractor even did a bit of a drift sometimes. Definitely shook a couple of bolts loose.
We left the old tractor in an open barn for the entire winter without winterizing it in any way. When we came back to it in early spring, it booted up without a problem




Comments